Canon CLC5151, Copying And Mail Box Manual

Page: 396 / 468

Process/Layout Settings 7-72
7
U
s
ing th
e
Exp
ress
C
o
p
y
Ba
sic F
eatures
Scre
en
4
Press [Framing] or [Blanking].
Details of each item are shown below.
[Framing]: Copy only the contents of the designated area while discarding the rest of the
original.
[Blanking]: Copy the original by blanking out the contents of the designated area.
5
Press [Next]
➞
select [Shift center] or [Do not shift center].
If only [Blanking] is selected, this step is unnecessary. Skip to step 6.
6
Press [OK]
➞
[Done].
Making Copies by the Original Image Repeated (Image
Repeat)
For instructions on this procedure using the Regular Copy Basic Features screen, see "Image
Repeat," on p. 4-61.
IMPORTANT
•
To use Area Designation (Framing) with the Image Repeat mode, first specify the Image Repeat mode,
and then designate the desired area. Only one area can be designated.
•
If the colour mode is set to 'Auto-Color Select', and the number of times the image to be repeated is set
to too many or the designated area is too small, the colour original may be scanned in the Black mode.
1
Press [Process/Layout]
➞
[Image Repeat].