Home
/
Canon
/
CLC4040
/
Reference Manual

Canon CLC4040, Reference Manual, Page: 292 / 524

Share

Page: 292 / 524

Canon CLC4040 Reference Manual Download Page 292

Department ID Management

6-18

6

Sy

stem M

anage

r Setting

s

Accepting B&W Copy and Print Jobs without Entering a
Department ID

The Allow Black Copy/Inbox Print Jobs and Allow Black Printer Jobs modes enable you to
restrict the machine to accept only black-and-white print jobs, and reject colour print jobs
without entering a Department ID and password.

1

Press

➞

[System Settings]

➞

[Dept. ID Management].

2

Press [On].

3

Select [On] or [Off]

➞

press [OK].

Allow Black Copy/Inbox Print Jobs

Allow Black Printer Jobs

[On]: [Allow Black Copy/Black Inbox Print] appears on the Enter the Department ID and

Password screen.

[Off]: [Allow Black Copy/Black Inbox Print] does not appear on the Enter the Department ID and

Password screen.

[On]: The machine accepts only black-and-white print jobs from computers that do not

correspond with a registered Department ID.

[Off]: The machine does not accept black-and-white print jobs from computers that do not

correspond with a registered Department ID.

«
...
290
291
292
293
294
...
»

Summary of Contents for CLC4040













































































































































































































































































































































































































































































































































Reviews:

No comments