Home
/
Canon
/
CLC4040
/
Reference Manual

Canon CLC4040, Reference Manual, Page: 151 / 524

Share

Page: 151 / 524

Canon CLC4040 Reference Manual Download Page 151

Finisher-X1

3-19

3

Optional Eq

uipm

ent

Finishing Modes

The Finisher-X1 is equipped with the following finishing modes.

IMPORTANT

The following types of paper are output to the centre output tray of the main unit and not to the Output
Tray of the finisher:
- 320 mm x 450 mm (SRA3) paper, envelopes, transparencies, labels, tracing paper, tab paper, glossy

paper, and Washi (Japanese paper).

NOTE

If the Collate or Group mode is set, the output tray moves downward as the stack of paper that is output
increases in quantity and thickness. Once the output tray has reached its stacking limit, printing stops
temporarily. Remove all of the prints from the output tray, and printing resumes.

■

Collate Mode

The prints are automatically collated into sets arranged in page order. The collated print sets can be
shifted by pressing [Offset].

■

Group Mode

All prints of the same original page are grouped together. The grouped print sets can be shifted by
pressing [Offset].

■

Offset Mode

The print output is shifted alternately to the front and back of the tray, in a vertical (portrait) orientation, or
a horizontal (landscape) orientation depending on the orientation of your originals.

NOTE

If you press [Offset] when either the Collate or Group mode is set, each set of prints is shifted before it is
delivered to the output tray.

«
...
149
150
151
152
153
...
»

Summary of Contents for CLC4040













































































































































































































































































































































































































































































































































Reviews:

No comments