manualshive.com logo in svg

Canon CiRC2550, Service Manual

Share
Download
Canon CiRC2550 Service Manual Download Page 741

Chapter 18  

18-26

18.6.3 Downloading/Writing the System Software (auto)

0014-4505

Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080i / iR C2550

[1]: Upgrade (AUTO)

The system software on the HDD and that in the USB device are compared. If the latter is new, it will be downloaded to the temporary storage area of the HDD.
At the end of the downloading, the machine restarts on its own to write the downloaded system software to the system area of the HDD and the flash ROM.

<Procedure>

1) If the machine is on, go through the HDD shut-down instructions, and turn off the main power.
2) Connect the USB device to the sub port.
3) Put the machine in download mode (normal or safe).
4) Go through the instructions on the control panel, and press the appropriate key.

[1] -> [0]: 

execute download / other than [0]: go back to Menu screen

F-18-50

5) While downloading is under way, the control panel screen shows its progress. At the end of the downloading, the machine restarts on its own to start writing to

the system area of the HDD or the flash ROM.

- Screen Showing the Progress of Downloading

- Screen Showing the Progress of Writing to the HDD

F-18-51

6) At the end of writing to the HDD, a message will appear asking you to turn off and then back on the power. Turn off the power, remove the USB device, and

turn the power back on.

F-18-52

18.6.4 Downloading the System Software (Confirmation execution when version is downed the same version)

0014-4506

Color iR C3380G / Color iR C2880G / Color iR C3380i / Color iR C3380 / Color iR C2880i / Color iR C2880 / iR C3480 / iR C3480i / iR C3080i / iR C2550

[2]: Upgrade (w Confirmation)

The system software on the HDD is compared against that in the USB device. Those system files that are newer will then be downloaded to the temporary storage
area of the HDD. If the system software in the USB is of the same or older version, a message will appear on the screen, offering a choice. Unlike menu item

Summary of Contents for CiRC2550







































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands