Canon CDI-E154-010 Page 72 User Manual Download

Page: 72 / 163

Shooting a Movie

The resolution can be set to either

(640 x 480),

(320 x 240) or

(160 x 120) (p. 58).

Slide the mode switch to

(Movie).

The maximum recording time (in seconds)
is displayed.

Press the shutter button fully.

• Shooting and sound recording starts

simultaneously.

• During shooting the recording time (in

seconds) and a red circle appear on the
LCD monitor.

Press the shutter button fully again
to stop recording.

• The maximum length of a movie clip (at

10 frames/sec. (

), 15 frames/sec.

(

)) is 30 sec. (

) or 3 min.

(

(according to Canon’s standardized tests).

Recording times may vary between SD cards.
See

SD Cards and Estimated Capacities

(p. 145).

• The maximum length of movies may vary

with the subject and shooting conditions.
Recording will automatically stop when
the maximum is reached or when the SD
card runs out of free capacity.

Summary of Contents for CDI-E154-010




































































































































































Search results

Summary of Contents for CDI-E154-010

Reviews:

Related manuals for CDI-E154-010

Brands by name

Popular brands

Canon CDI-E154-010, User Manual

Search results

Summary of Contents for CDI-E154-010

Reviews:

Related manuals for CDI-E154-010

Brands by name

Popular brands