Canon Cassette Feeding Unit-AP1, Service Manual

Page: 27 / 49

[1]
2. Pull the Pickup Roller [2]/Feed Roller [3]/Separation Roller [4] while holding down the claw [1].
• 3 Claws [1]
[1]
[3]
[2]
[4]
1x
NOTE:
When the consumable parts are replaced, be sure to clear the parts counter in the service mode.
• COPIER > COUNTER > DRBL-2 > C3-PU-RL
• COPIER > COUNTER > DRBL-2 > C3-FD-RL
• COPIER > COUNTER > DRBL-2 > C3-SP-RL
• COPIER > COUNTER > DRBL-2 > C4-PU-RL
• COPIER > COUNTER > DRBL-2 > C4-FD-RL
• COPIER > COUNTER > DRBL-2 > C4-SP-RL
Removing the Cassette 3 Pickup Unit
■ Preparation
1. Remove all Cassettes.
2. Open the Right Door/Right Door(Lower)/Cassette Right Door(Lower).
3. Remove the Right Cover(Rear Upper).
4. Remove the 1 Screw from the Cover(Rear Lower).
5. Remove the Right Cover Assembly(Rear Lower).
6. Remove the Right Cover(Front Lower) and Right Door(Lower).
7. Remove the Cassette Cover(Right Front).
8. Remove the Cassette Right Door(Lower).
9. Remove the Cassette Right Door(Lower).
10. Remove the 1 Screw.
4. Disassembly/Assembly
22