Canon CARPS2, User Manual, Page: 128 / 149

[Finishing] Sheet
You can configure settings relating to finishing such as collating, stapling, etc.
Collate Group Offset
Rotate Hole Punch Staple
[Output Method]
Specifies a separating method when printing multiple copies.
[Collate]
Outputs the specified number of copies in page order.
[Group]
Outputs the specified number of copies with all pages having the same page number grouped together.
[Staple]
Staples the pages when outputting print data. Select staple position(s).
[On (Eco (Staple-Free))] crimps the paper without using staples.
The available staple positions vary depending on the output paper size, paper feed direction, and paper
source method.
[Hole Punch]
Outputs printed pages with holes for binding. This function can only be used when enabled at the device. The
type of punch holes you can select depends on the optional unit attached to the device.
[Offset]
Offsets each set of pages output.
[Specify Offset Interval: Every]
Outputs pages so that each specified number of pages is offset.
[Rotate]
Outputs each print job at a 90 degree angle relative to the one before and after it.
[Fold]
Specifies the type of fold when outputting pages folded into one of a variety of patterns.
Settings List
124