Inserting Tab Paper
You can insert tab paper between specified pages. You can also print on the tab part.
1
Display the [Paper Feed] sheet.
2
Select [Insert Sheets] → click [Settings].
3
In the [Sheet Insertion Settings] dialog box, select tab paper from [Sheets to Insert].
4
Set [Paper Source], [Inserted Sheets/Tab Paper] and [Insertion Position].
5
To change the paper type, click [Paper Type for Tab Paper] > [Settings] → select the
paper type to be used from [Paper Type].
To set the tab paper size and print position on the tab part, follow the procedure below.
If setting is unnecessary, click [OK] to close the [Paper Type Settings] dialog box.
6
Click [Tab Details].
7
In the [Tab Settings] dialog box, select the paper size from [Tab Paper Size].
8
Select [Offset printing position] → specify [Offset Width] → click [OK].
If you have created print data with one of the following paper sizes, do not select [Offset printing position].
The tab part is included in the width.
- A4 tab paper: 223 x 297 mm (8.77 x 11.69 inches)
- Letter tab paper: 228.6 x 279.4 mm (9.00 x 11.00 inches)
9
Click [OK].
Related Topics
Using Various Types of Paper
99
Summary of Contents for CARPS2
