manualshive.com logo in svg

Canon CanoScan LiDE 120, Online Manual, Page: 193 / 245

Share
Download
Canon CanoScan LiDE 120 Online Manual Download Page 193

Image Corrections and Color Adjustments

You can correct images and adjust colors using the scanner driver.

Important

• When image correction or color adjustment is applied to items without moire, dust/scratches, or faded

colors, the color tone may be adversely affected.

• Image correction results are not reflected in the trial scan screen.

Note

• Screens may vary depending on the application.
• Selectable settings depend on 

Kind

 settings.

• Scanning may take longer than usual when image correction or color adjustment is applied.

Image Adjustment

When Image Adjustment is set, the brightness of the specified portion of the image is optimized. Images
can be adjusted according to the automatically detected item type or the specified item type. The result
of the adjustment will be reflected in the entire image.

None

Image Adjustment will not be applied.

Auto

Applies Image Adjustment by automatically detecting the item type. It is recommended that you
normally select this setting.

Photo

Applies Image Adjustment suitable for photos.

Magazine

Applies Image Adjustment suitable for magazines.

Document

Applies Image Adjustment suitable for text documents.

193

Summary of Contents for CanoScan LiDE 120






















































































































































































































































Reviews:

No comments