![background image](http://html.mh-extra.com/html/canon/canoscan-2700f/canoscan-2700f_getting-started_62739023.webp)
23
The SCSISelect settings
The following is a description of the settings for the SCSISelect utility program.
Host Adapter Interface Definitions
Host Adapter Interrupt (IRQ) Channel
This function sets the IRQ channel value for the SCSI host adapter card if the computer does not support Plug &
Play functions. The default IRQ of the AVA-1502AP SCSI Host Adapter card is set at [10] at the factory.
CAUTION:
• If the computer supports Plug & Play functions, see What To Do When an IRQ or I/O Port Address
Conflict Arises
for instructions on how to change the IRQ.
Host Adapter Direct Memory Access (DMA) Channel
This function sets the DMA setting for the AVA-1502AP SCSI Host Adapter card. The default setting is [Disabled].
We do not recommend changing this setting.
Host Adapter SCSI ID
Sets the SCSI ID for the AVA-1502AP card. The default setting 7 has the highest priority. We recommend that do
not change this setting.