manualshive.com logo in svg

Canon C3220, Copying Manual, Page: 346 / 372

Share
Download
Canon C3220 Copying Manual Download Page 346

Job Duration Display

9-10

9

Customizing Settings

Job Duration Display

If Job Duration Display is set to 'On', the remaining time that it takes to complete an 
operation is displayed in units of one minute on the touch panel display. However, 
not all copy modes support this feature.

NOTE

 

•

The waiting time is displayed as <Approx Prt Time> (approximate printing time) on the 
screen that is displayed when the machine is printing.

•

Even if Job Duration Display is set to 'On', the waiting time is not displayed in the 
following cases:

- The waiting time is less than one minute.

- When the Different Size Originals mode is set with the 1 2-Sided or 2 2-Sided mode

- When heavy paper or transparencies is selected as the paper type

- When paper is fed from the stack bypass

•

If the Staple mode is specified, the discrepancy between the displayed waiting time and 
the actual waiting time may increase.

•

The default setting is 'Off'.

1

Press 

 (Additional Functions) 

➞

 [Copy Settings] 

➞

 [Job 

Duration Display].

NOTE

 

If the desired setting is not displayed, press [

▼

] or [

▲

] to scroll to the desired 

setting.

Summary of Contents for C3220





















































































































































































































































































































































































Reviews:

No comments