Canon C3220 Copying Manual Download

Page: 303 / 372

Adjusting the Color

7-7

Special Cop

ying F

eatures - Color and Image Quality Adjustments

●

If you select a key that already has settings stored in it:

❑

A screen appears, asking for your confirmation to overwrite the previous
settings.

❑

Press [Yes].

To cancel overwriting the settings, press [No].

The message <Stored in memory.> appears for approximately two seconds on
the touch panel display.

The stored settings are displayed.

Press [Cancel]

➞

[Cancel]

➞

[Done].

The display returns to the Copy Basic Features screen.

NOTE

Pressing [Cancel]

➞

[Cancel]

➞

[Done] only stores the color balance settings in

the selected key ([C1] to [C4]), but does not recall them. If you press [OK]

➞

[OK]

➞

[Done], the color balance settings are stored in the selected key ([C1] to [C4]),

and recalled at the same time.

Naming a Color Balance Key

Press [Special Features]

➞

press [

▼

] or [

▲

] until [Color

Balance] appears

➞

press [Color Balance].

If necessary, see the screen shots in steps 1 and 2 of "Adjusting the Color
Balance," on p. 7-2.

Summary of Contents for C3220





















































































































































































































































































































































































Search results

Summary of Contents for C3220

Reviews:

Related manuals for C3220

Brands by name

Popular brands

Canon C3220, Copying Manual

Search results

Summary of Contents for C3220

Reviews:

Related manuals for C3220

Brands by name

Popular brands