manualshive.com logo in svg

Canon C3220, Copying Manual

Looking for a free manual download for the Carmen C3220 product? Look no further! At manualshive.com, you can easily access and download the user manual for the Carmen C3220. Get all the information you need to make the most out of your product, completely free of charge.

Share
Download
background image

Using Image Creation Modes

6-6

6

Special Cop

ying F

eatures - Image Editing

 

Image Repeat

This mode enables you to repeatedly copy the entire original image in either the 
vertical or horizontal direction. The following two settings are available for the Image 
Repeat mode.

IMPORTANT

 

•

To use Area Designation (Framing) with the Image Repeat mode, first specify the Image 
Repeat mode, and then designate the desired area. Only one area can be designated.

•

If the number of times the image to be repeated is set to too many or the designated area 
is too small, the color original may be scanned in the Black mode, even if the color mode 
is set to 'Auto-Color Select'.

■

Automatic Setting

The original image is copied so that the maximum possible number of repeats fit onto the 
selected paper size.

IMPORTANT

 

The Image Repeat (Auto) mode cannot be used with the Automatic Paper Selection, 
Auto Zoom, Auto XY Zoom, Entire Image, Multi-Page Enlargement, Book 2-Sided, 
Two-page Separation, Cover/Sheet Insertion, Image Combination, Shift, Booklet, 
Transparency Interleaving, Margin, Different Size Originals, Frame Erase, Mirror Image, 
Tab Paper, or Area Designation (Blanking) mode.

■

Manual Setting

The original image is copied the specified number of times.

IMPORTANT

 

The Image Repeat (Manual) mode cannot be used with the Entire Image, Multi-Page 
Enlargement, Book 2-Sided, Two-page Separation, Cover/Sheet Insertion, Image 
Combination, Shift (No. Key Entry), Booklet, Transparency Interleaving, Margin, Different 
Size Originals, Frame Erase, Mirror Image, Tab Paper, or Area Designation (Blanking) 
mode.

Summary of Contents for C3220





















































































































































































































































































































































































Reviews:

No comments

Related manuals for C3220

Olivetti d-Copia 120 Online Manual preview
d-Copia 120
Brand: Olivetti Pages: 36
Develop ineo 223 Quick Manual preview
ineo 223
Brand: Develop Pages: 294
Xerox Copier Getting Started preview
Copier
Brand: Xerox Pages: 114
Xerox Copycentre C118 Software Manual preview
Copycentre C118
Brand: Xerox Pages: 47
Xerox D95 Supplementary Manual preview
D95
Brand: Xerox Pages: 70

Brands by name

Popular brands

Load more brands