Canon C3220, Copying Manual

Page: 215 / 372

Shifting the Original Image
4-5
4
Special Cop
ying F
eatures - Image Adjustment
5
Press (Start).
Copying starts.
NOTE
•
To cancel this setting, press [Special Features]
➞
[Shift]
➞
[Cancel].
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Using the Numeric Keys
1
Place your originals
➞
press [Special Features]
➞
[Shift].
If necessary, see the screen shots in steps 1 and 2 of "Using the Arrow Keys," on
p. 4-3.
NOTE
If the desired setting is not displayed, press [
▼
] or [
▲
] to scroll to the desired
setting.
2
Use numeric keys on the inch entry pop-up screen to enter
the shift position.
❑
Press [No. Key Entry].
❑
Select the shift direction.
❑
Enter the shift value using the numeric keys on the inch entry pop-up screen.
❑
Press [Done].
NOTE
•
To change a value you entered, select the shift direction
➞
enter the correct value
using the numeric keys on the inch entry pop-up screen.
•
If you make a mistake when entering values, press [C] on the inch entry pop-up
screen
➞
enter the correct values.
•
To enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use - (numeric keys), and
(Clear) to clear your entries.
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
•
For instructions on entering values in inches, see Chapter 2, "Basic Operations," in
the
Reference Guide .