Canon C200B, Instruction Manual

Page: 169 / 236

169
Selecting a Network Connection
Selecting a Network Connection
You can save up to 4 network configuration profiles. If you just saved a new network configuration, it will already
be automatically selected so follow this procedure to select a different configuration profile.
1 Open the [Connection Settings] screen.
>
[
!
Network Settings]
>
[Connection Settings]
2 Select the desired configuration number and then press the joystick.
3 Select [OK] and then press the joystick.
Checking and Changing Network Settings
You can check and, if necessary, edit the settings of the currently selected network configuration profile even
after the initial setup. Changing settings manually requires more advanced knowledge of Wi-Fi and network
settings.
1 Open the configuration profile selection submenu.
>
[
!
Network Settings]
>
[Connection Settings]
2 Select the desired configuration number and then press the joystick.
3 Select [Edit] and then press the joystick.
4 Select [Infrastructure], [Camera Access Point] or [Ethernet].
• Continue with the procedure corresponding to the network connection method being used.
- For infrastructure connections, follow the procedure for
Connecting in Infrastructure Mode
starting from
step 3 (
A
164).
- For camera access point connections, follow the procedure for Camera Access Point starting from step 3
(
A
163).
- For Ethernet connections, follow steps 1 and 4 of the procedure for
Connecting to a Wired (Ethernet)
Network
(
A
168).