Canon C200B, Instruction Manual

Page: 157 / 236

157
Audio Output
Audio Output
The camera can output audio from the SDI terminal, HDMI OUT terminal,
×
(headphone) terminal or speaker*.
When recording with 4-channel audio, you can select which two channels of the 4 audio channels recorded with
the clip will be output from the terminals and speaker.
* Only monaural output is available for the speaker.
Audio output configuration
1
You can select the two channels to be output with the procedure below.
* Not available for the SDI terminal.
1 Open the audio channel selection submenu of the desired terminal.
>
[
¡ $
Audio Setup]
1
>
[Monitor Channels] (headphones or speaker) or [HDMI OUT Channels]
(HDMI OUT terminal)
1
For mode, page
!
.
2 Select the desired option and then press the joystick.
• The audio channels selected for output will appear on the right of the screen (only when
>
[
¢ %
Monitoring Setup]
1
>
[Custom Display 2]
>
[Monitor Channels] is set to [On]).
1 l
Appears on the previous page in the menu.
Options
All of the following settings are available for [Monitor Channels]; only [CH1/CH2] and [CH3/CH4] are available for
[HDMI OUT Channels].
* mode only. Not available when
>
[
Æ
"
Recording/Media Setup]
>
[Audio Format (MP4)] is set to [AAC
16 bit 2CH].
NOTES
• If you set an assignable button to [Monitor Channels] (
A
125), you can press the button to toggle between
the audio channel output options.
Recorded audio configuration Audio output during recording/playback
Audio format
Audio bit depth or
bit rate
SDI terminal HDMI OUT terminal
1
4-channel
linear PCM
24 bit or 16 bit
4-channel
linear PCM
24 bit
2-channel
linear PCM
16 bit
2-channel MPEG-2
AAC-LC
256 kbps
Operating modes:
Setting
Audio output
L R
[CH1/CH2] CH1 CH2
[CH1/CH1] CH1 CH1
[CH2/CH2] CH2 CH2
[CH1+2/CH1+2] CH1+CH2 mixed CH1+CH2 mixed
[CH3/CH4]* CH3 CH4
[CH3/CH3]* CH3 CH3
[CH4/CH4]* CH4 CH4
[CH3+4/CH3+4]* CH3+CH4 mixed CH3+CH4 mixed
[CH1+3/CH2+4]* CH1+CH3 mixed CH2+CH4 mixed
*