Canon C200B, Instruction Manual, Page: 147 / 236

147
Clip Operations
Adding Shot Marks
During playback, you can add a shot mark (
!
) to frames that you want to set apart in an XF-AVC clip.
Adding Shot Marks during Playback
To add a shot mark to a clip during playback or playback pause, you must first set an assignable button to [Add
Shot Mark] in advance.
1 Set an assignable button to [Add Shot Mark] (
A
125).
2 During playback or playback pause, press the assignable button at the point in the clip to add the
shot mark.
• A message indicating the shot mark appears on the screen and the shot mark is added to the clip.
• Adding a shot mark to a clip during playback will pause the playback.
NOTES
• Up to 100 shot marks can be added to a single clip.
• There may be up to a 0.5 second delay between the frame shown when you press the assignable button and
the frame to which the camera adds the shot mark.
Deleting All Shot Marks in a Clip from the Index Screen
1 Select the desired clip and then press the joystick to open the clip menu.
2 Select [Del. All Shot Marks] and then press the joystick.
• The clip information screen appears and it prompts you to confirm the operation.
3 Select [OK] and then press the joystick.
• All shot marks in the selected clip are deleted and the screen changes back to the previous index screen.
Deleting Clips
You can delete clips from a CFast or SD card one at a time. To delete XF-AVC clips with an
$
mark, delete the
$
mark beforehand (
A
146)
1 Select the desired clip and then press the joystick to open the clip menu.
2 Select [Delete Clip] and then press the joystick.
• The clip information screen appears and it prompts you to confirm the operation.
3 Select [OK] and then press the joystick.
• Select [Cancel] instead to cancel the operation.
• While the clip is being deleted, the operation cannot be canceled.
4 When the confirmation message appears, press the joystick.
Operating modes:
Operating modes:
Operating modes: