4
4
4-10
4-10
Installation > Adjustments > Adjustment of Paper Stop Positiom.
Installation > Adjustments > Adjustment of Paper Stop Positiom.
Adjustment of Paper Stop Positiom.
To ensure the skew correction for paper edge skew dure to swithback, execute adjustment for
paper-stop position before starting switchback from the stopper.
Stop position of paper
Stopper
Stop position
of paper
Stopper
1)Open the Front Cover and insert the door-switch tool into the door switch.
Door Switch
F-4-21
F-4-22
2) Remove the Switch Cover.
• 1 Screw
Switch Cover
Screw
3) Set the DIP switch SW382 on the switch PCB as shown in the figure below (1, 5, 6, 8 : ON)
Once pressing the ENTER (SW385) button, the LED shows "0".
SW382
SW381
SW383
(-)
(+)
ENTER
SW384 SW385
DSP381
DIP Switch
SW382
ENTER (SW385) Button
LED
F-4-23
F-4-24