background image

Canon

 

 Booklet Maker Service Support Guide 

IX.  Appendix 

A.  Specifications 

Note: All specifications are for reference purposes only and are subject to 
change without notice. 

Table 22 –  Booklet Maker Specifications 

Item 

Specifications 

Description 

High-volume book stacker for production environments 

Paper Sizes (W x L) 

Minimum:  8” x 8” (203 mm x 203 mm) 
Maximum:  12.6” x 19.2” (320 mm x 488 mm) with Standard PIM 
 

13.78” x 19.7” (350 mm x 500 mm) with Large-Size PIM  

Paper Weight 

Uncoated/Plain:  20 lb bond to 110 lb Text (80 g/m

to 160 g/m

2

 

16 lb bond to 90 lb Cover (60 g/m

to 250 g/m

2

) depending on type 

and quality 

Coated: 

Approximately 100 g/m

2  

to 155 g/m

2

 

 

Greater than 155 g/m

testing upfront is recommended  

Sheet Rotation 

Minimum Size: 

Approximately 8.15” x 8” (210 mm x 203 mm) 

Maximum Size:  Approximately 12.6” x 8.9” (320 mm x 227 mm) 

Book Thickness 

Maximum Finished Book Thickness: 

Up to 0.41” (10.4 mm) or up to 208 pages using 20 lb bond (80 g/m

2

Minimum Thickness: 1 sheet folded, not stitched 

Maximum Set Thickness: 

Up to 0.20” (5.2 mm) or up to 52 sheets using 20 lb bond (80 g/m

2

Trimming 

Minimum Trimmed Book Size:  Approximately 3.15” (80 mm) 
Maximum fore-edge trim: 

Approximately 1.1” (28 mm) 

Stacker Capacity 

Standard: Up to 35 books of 20 sheets (20 lb bond (80 g/m

2

)) 

Optional Book Stacker: Approximately 36.6” (930 mm) 

Stitching 

  Single side-loading stitch head 

  1 to 6 stitches (Evenly Spaced) 

  Stitches per reel: Up to 291,500 

Job Memory 

Up to 24 jobs 

Power Source 

Single Phase 200-240V, 50/60 Hz, 20 A 

Dimensions (H x W x D)  Approximately 52.4” x 65.9” x 73.6” (1,330 mm  x 1,675 mm x 1,870 mm) 

8

 

Weight 

Approximately 1,549 lb (702 kg)

 8

 

Includes the connecting bridge. The dimensions are when the Booklet Maker is assembled. 

Table 23 – Book Stacker Specifications 

Item 

Specifications 

Stacker Capacity 

Approximately 36.6” (930 mm) 

 

400 booklets of 10 sheets/40 pages (2 mm thick spine)  

 

175 booklets of 25 sheets/100 pages (5 mm thick spine)  

 

80 booklets of 50 sheets/200 pages (10 mm thick spine) 

Book Sizes  

 

Spine length: minimum 4.7” (120 mm), maximum 14.6” (370 mm) 

 

Book width: minimum 3.15” (80 mm), maximum 10.2” (260 mm) 

 

Book thickness: minimum 4-page booklet (dependent on media), maximum 
200 page booklet 0.39”  (10 mm) 

Power Source 

From the  Booklet Maker 

Dimensions (H x W x D) 

Book Stacker: 

 

 

Approximately 40.6” x 49.2” x 53.1” (1,030mm x 1,250 mm x 1,350 mm) 

 and the Book Stacker 
 

Approximately 52.4” x 95.3” x 69.7” (1,330 mm x 2,420 mm x 1,770 mm) 

Weight 

Approximately 330 lb (150 kg) 

 Booklet Maker Service Support Guide 

March 2015 

Revision 1 

Page 24 

Summary of Contents for BLM 550+































Reviews: