Description of Print Settings
58
Printer Driver Functions (Macintosh)
2 Page/Sheet Printing / 4 Page/Sheet Printing
Pages are reduced and printed so that two or four pages fit on each printed page.
You can also select page order and whether to place a border around each page.
Poster (Divided into 4) / (Divided into 9) / (Divided into 16)
These enlarge and split the print image across several sheets of paper. The printer
sheets can then be assembled to make a large poster. You can also select Cut/
Paste lines and Cut/Paste string. To print only the certain pages, click the specific
pages on the Preview Area.
(2)
Two-sided Printing
Prints data on both sides of a sheet of paper. Note that when the printer finishes
printing data on the front side of paper, it pauses and displays the message. Follow
this message to reverse the printed paper, and load it in the printer.
When you select this function, use Stapling Side to specify which side is to be
stapled, longer side or shorter side of a sheet of paper. Select the margin for stapling
with Margin for stapling. If you are stapling on the longer side of the paper, be sure
to place a sheet of paper lengthwise, and check Long-side stapling. If you are
stapling on the shorter side of the paper, place paper widthwise, and check Short-
side stapling.
(3)
Fit-to-page Printing
Executes the scaled printing automatically. When selected, you can specify the
Printer Paper Size.
This option fits the document paper size set in the application to the paper size loaded
in the printer.
(4)
Destination
Select the print output destination. Printer is the usual selection.
To check the layout or other image elements before printing, select Preview. To save
the document as a PICT file, select PICT File.
