Canon Arizona 6100 XTHF Mark II Series, User Manual, Page: 86 / 234

Training Requirements
Introduction
The operator must receive training for safety issues, printer operation, and the appropriate ONYX
Thrive software prior to operating the printer.
Safety training
Before operating the Arizona 6100 XTHF Mark II series printer, make sure you have read and
understood all of chapter Safety Information.
Operator Training
For optimal safety and print quality, all printer operators must have received training by qualified
service personnel. training provides a general orientation to printer safety and operating
procedures. This User Guide is not a substitute for official training.
ONYX Workflow Training
Maximum performance from the printer requires a properly trained operator. Canon trains the
operator in the use of the printer hardware and software at installation. However, this is not a
substitute for formal training.
Operators must be fully versed in the operation of ONYX Thrive Workflow software. For any
operator unfamiliar with their operation, training is required. Training courses are available;
contact your local representative for an ONYX-certified training program.
Training Requirements
86 Chapter 4 - Operating the Printer