manualshive.com logo in svg

Canon A720 1S, User Manual

Share
Download
Canon A720 1S User Manual Download Page 89

Various Shooting Methods

87

See 

Functions Available in Each Shooting Mode 

(p. 206).

In this mode, the camera shoots continuously while the shutter button 
is held down. If you use the recommended memory card*1, you can 
shoot continuously (smooth continuous shooting) at a set shooting 
interval until the memory card is full (p. 190). 

To Cancel Continuous Shooting

Follow step 1 to display 

.

Continuous Shooting

Shooting Mode  

*Recommended Memory Card:

Super high-speed SDC-512MSH memory card (sold separately) to 
which low-level formatting (p. 56) is conducted immediately before 
shooting.

• This reflects standard shooting criteria established by Canon. Actual results may 

vary according to the subject and shooting conditions.

• Even if continuous shooting suddenly stops, the memory card may not be full.

1

Select .

1.

Press the 

 button.

2.

Use the 

 or 

 button to select 

 

and choose 

 with the   or   

button.

3.

Press the 

 button.

2

Shoot.

•

The camera will continue to record successive images while 
the shutter button is held down. Recording will cease when the 
shutter button is released.

Various Shooting Methods

Summary of Contents for A720 1S




















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands