Canon 9491B003 Online Manual Download Page 167

Page: 167 / 629

Aligning the Print Head

If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head
position.

Note

• When the ink has run out during printing the nozzle check pattern, the error message will appear on the

LCD.

A Message Is Displayed

You need to prepare: a sheet of A4 or Letter-sized plain paper (including recycled paper)*

* Be sure to use paper that is white and clean on both sides.

1. Make sure that the power is turned on.

2. Load a sheet of A4 or Letter-sized plain paper in the cassette 1.

After inserting the cassette into the printer, the paper information registration screen is displayed on the
LCD. Select

Letter

for

Size:

and

Plain paper

for

Type:

, then press the

button.

Important

• The cassette 2 is not available for the print head alignment procedure. Be sure to load paper in

the cassette 1.

3. Extend the output tray extension, then open the paper output support.

4. Press the

Setup

button, use the or button to select

Maintenance

, then press the

button.

LCD and Operation Panel

5. Use the or button to select

Head alignment

, then press the

button.

The print head alignment sheet will be printed and the print head position will be adjusted automatically.

This takes about 3 to 4 minutes.

Note

• If the automatic adjustment of the print head position has failed, the error message appears on the

LCD.

A Message Is Displayed

• If the print results are still not satisfactory after adjusting the print head position as described above,

adjust the print head position manually from the computer.

167

Summary of Contents for 9491B003






















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 9491B003

Reviews:

Related manuals for 9491B003

Brands by name

Popular brands

Canon 9491B003, Online Manual

Search results

Summary of Contents for 9491B003

Reviews:

Related manuals for 9491B003

Brands by name

Popular brands