Canon 9443a002 - EOS 1Ds Mark II Digital Camera SLR, Instruction Manual

Page: 8 / 180

8
Camera Care
¡
This camera is a precision instrument. Do not drop it or subject it to physical
shock.
¡
The camera is not waterproof and cannot be used underwater. If the camera
gets wet, remove the battery and promptly take it to the nearest Canon
dealer. Wipe off any water droplets with a dry cloth. If the camera has been
exposed to salty air, wipe with a well-wrung wet cloth.
¡
Never leave the camera near anything having a strong magnetic field such
as a magnet or electric motor. Also avoid using or leaving the camera near
anything emitting strong radio waves such as a large antenna. Strong
magnetic fields and radio waves can cause camera misoperation or destroy
image data.
¡
Do not leave the camera in excessive heat such as in a car in direct sunlight.
High temperatures can cause the camera to malfunction.
¡
The camera contains precision electronic circuitry. Never attempt to
disassemble the camera yourself.
¡
Use a blower to blow away dust on the lens, viewfinder, mirror, and focusing
screen. Do not use cleaners that contain organic solvents to clean the
camera body or lens. For stubborn dirt, consult your nearest Canon dealer.
¡
Do not touch the camera’s electrical contacts with your fingers. This is to
prevent the contacts from corroding. Corroded contacts can cause camera
misoperation.
¡
If the camera is suddenly brought in from the cold into a warm room,
condensation may form on the camera and internal parts. To prevent
condensation, first put the camera in a sealed plastic bag and let it adjust to
the warmer temperature before taking it out of the bag.
¡
If condensation forms on the camera, do not use the camera. This is to avoid
damaging the camera. Remove the lens, memory card, and battery and wait
until the condensation evaporates.
¡
If the camera will not be used for an extended period, remove the battery
and store the camera in a cool, dry, well-ventilated location. Even while the
camera is in storage, press the shutter button a few times once in a while to
check that the camera is still working.
¡
Avoid storing the camera where there are corrosive chemicals such as a
darkroom or chemical lab.
¡
If the camera has not been used for an extended period, test all its functions
before using the camera. If you have not used the camera for some time or if
there is an important shoot coming up, have the camera checked by your
Canon dealer or check the camera yourself and make sure it is working
properly.
Handling Precautions