Canon 9443a002 - EOS 1Ds Mark II Digital Camera SLR Page 71 Instruction Manual Download

Page: 71 / 180

Normally, you press the <

> button and <

> button simultaneously

to switch to the registered AF point. However, with C.Fn-18-1/2 (p.153),
you can just press the <

> button to switch to the registered AF point.

Set Custom Functions with

(1) Press the <

> button and <

button simultaneously.

This is the default method.

(2) Press only the <

> button to

switch to the registered AF point.

(p.153)

(3) Switch to the registered AF point

only while pressing the <

button.

(p.153)

When you release the <

> button,

the camera will return to the original
AF point.

Switching to the Registered AF Point

C.Fn-18-1

C.Fn-18-2

If you set or cancel C.Fn-13, the center AF point will become the
registered AF point. This does not apply if you change C.Fn-13-1 to C.Fn-
13-2 or vice versa.

If C.Fn-18-1/2 and C.Fn-04-1/3 are also set, you can just press the <

button to switch to the registered AF point and activate the autofocus at
the same time.

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR





















































































































































































Search results

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Reviews:

Related manuals for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Brands by name

Popular brands

Canon 9443a002 - EOS 1Ds Mark II Digital Camera SLR, Instruction Manual

Search results

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Reviews:

Related manuals for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Brands by name

Popular brands