Canon 9443a002 - EOS 1Ds Mark II Digital Camera SLR Instruction Manual Download Page 38

Page: 38 / 180

Select [Date/Time].

Select the <

> tab.

Hold down the <

> button and

turn the <

> dial to select [

Date/

Time

]. Then let go of the <

button.

Set the date and time.

The selection shifts each time you
press the <

> button.

Hold down the <

> button and

turn the <

> dial to select the correct

number. Then let go of the <

button.

Set the date display format.

Hold down the <

> button and

turn the <

> dial to select one of the

following display formats: [

mm/dd/yy

[

dd/mm/yy

], [

yy/mm/dd

]. Then let go

of the button.

Press the <

> button.

The date and time will be set and the
menu will reappear.

Setting the Date and Time

Each captured image is recorded with the date and time it was taken. If the
date and time are not properly set, the wrong date/time will be recorded.
Make sure you set the date and time correctly.

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR





















































































































































































Search results

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Reviews:

Canon 9443a002 - EOS 1Ds Mark II Digital Camera SLR, Instruction Manual, Page: 38 / 180

Search results

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Reviews: