Canon 9443a002 - EOS 1Ds Mark II Digital Camera SLR Page 23 Instruction Manual Download

Page: 23 / 180

Remove the caps.

Remove the rear lens cap and the
body cap by turning them as shown by
the arrow.

Attach the lens.

Align the red dots on the lens and
camera and turn the lens as shown by
the arrow until it snaps in place.

On the lens, set the focus mode
switch to <

If it is set to <

>, autofocus will not

be possible.

Remove the front lens cap.

While pressing the lens release
button, turn the lens as shown by
the arrow.

Turn the lens until the red dot is at the
top, then detach the lens.

Mounting and Detaching a Lens

Mounting a Lens

Detaching the Lens

When attaching or detaching the lens, take care to prevent dust from
entering the camera through the lens mount.

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR





















































































































































































Search results

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Reviews:

Related manuals for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Brands by name

Popular brands

Canon 9443a002 - EOS 1Ds Mark II Digital Camera SLR, Instruction Manual

Search results

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Reviews:

Related manuals for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Brands by name

Popular brands