Canon 9443a002 - EOS 1Ds Mark II Digital Camera SLR Page 164 Instruction Manual Download

Page: 164 / 180

164

The lens focus mode switch is set to <

On the lens, set the focus mode switch to <

>. (p.23)

Camera shake occured when you pressed the shutter button.

To prevent camera shake, hold the camera still and press the
shutter button gently. (p.28, 37)

The data in the memory card is damaged.

Format the memory card. (p.118)

Use the proper memory card. (p.3)

The image is erase-protected.

Cancel the protection. (p.112)

The correct date and time has not been set.

Set the correct date and time. (p.38)

The image is out of focus.

The memory card is unusable.

Image Review & Operation

The image cannot be erased.

The shooting date and time is wrong.

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR





















































































































































































Search results

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Reviews:

Related manuals for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Brands by name

Popular brands

Canon 9443a002 - EOS 1Ds Mark II Digital Camera SLR, Instruction Manual

Search results

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Reviews:

Related manuals for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Brands by name

Popular brands