Canon 9443a002 - EOS 1Ds Mark II Digital Camera SLR Page 16 Instruction Manual Download

Page: 16 / 180

In this manual, the icons and markings indicating the camera’s
buttons, dials, and settings correspond to the icons and markings on
the camera.

For more information, reference page numbers are provided in
parentheses (p.**).

The Canon EF50mm f/1.4 USM lens is used as the demonstration
lens in this Instruction Manual.

The procedures assume that the Menu and Custom Functions are set to
the default settings.

The

icon indicates that the setting can be changed with the

menu.

(

) or (

) indicates that the relevant function remains active for 6

sec. or 16 sec. respectively after you let go of the button.

This manual uses the following alert symbols:

The Caution symbol indicates a warning to prevent shooting
problems.

The Note symbol gives supplemental information.

Conventions Used in this Manual

In the text, the <

> icon indicates the main switch.

All operations described in this manual assume that
the <

> switch is set to <

> or <

The <

> icon indicates the Main Dial.

The <

> icon indicates the Quick Control Dial.

The <

> icon indicates the Quick Control Dial switch.

Operations with the <

> dial assume that the <

switch is already set to <

>. Be sure it is set to

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR





















































































































































































Search results

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Reviews:

Related manuals for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Brands by name

Popular brands

Canon 9443a002 - EOS 1Ds Mark II Digital Camera SLR, Instruction Manual

Search results

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Reviews:

Related manuals for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Brands by name

Popular brands