Canon 9443a002 - EOS 1Ds Mark II Digital Camera SLR Instruction Manual Download Page 116

Page: 116 / 180

116

Select the folder containing the
images to be erased.

(p.61)

Set the playback mode.

Press the <

> button.

If the folder selection screen is
displayed, hold down the <

button and turn the <

> dial to set

the playback mode. Any image display
format is okay.

Press the <

> button.

The Erase menu will appear at the
bottom of the screen.

On the Erase menu, select [ALL].

Hold down the <

> button and turn

the <

> dial to select [

ALL

]. Then let

go of the button.

The conﬁrmation dialog will appear.

Erase the images.

Hold down the <

> button and turn

the <

> dial to select [

]. Then let

go of the button.

The access lamp will light or blink and
all the unprotected images in the
folder will be erased.

Erasing All Images in a Folder

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR





















































































































































































Search results

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Reviews:

Canon 9443a002 - EOS 1Ds Mark II Digital Camera SLR, Instruction Manual, Page: 116 / 180

Search results

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Reviews: