Canon 9443a002 - EOS 1Ds Mark II Digital Camera SLR Instruction Manual Download Page 114

Page: 114 / 180

114

You can record and add sound to any image. The sound data is
recorded in the image ﬁle and can be played with the software provided.

Display the image to have sound.

Record the sound.

Press the <

> button for about 2

sec.

When [

Recording

] appears, keep

pressing the <

> button and speak

into the built-in microphone. The
maximum time for a single sound
recording is 30 sec.

To end the sound recording, let go of
the button.

Images having a sound recording will
have the <

> icon displayed.

Sound Recording for an Image

microphone

Sound recording is possible while in any image display format.

Sound recording is not possible with a protected image.

The camera cannot playback the sound.

To make a sound recording longer than 30 sec. , repeat step 2 to make
another recording for the same image.

You can also record sound right after image capture during the image
review by following step 2.

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR





















































































































































































Search results

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Reviews:

Canon 9443a002 - EOS 1Ds Mark II Digital Camera SLR, Instruction Manual, Page: 114 / 180

Search results

Summary of Contents for 9443a002 - EOS 1Ds Mark II Digital Camera SLR

Reviews: