Cleaning the Print Head
Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check
pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head
consumes ink, so clean the print head only when necessary.
1. Make sure that the power is turned on.
2. Hold down the
RESUME/CANCEL
button until the
POWER
lamp flashes white once, then
release it immediately.
The printer starts cleaning the print head.
The cleaning will be complete when the
POWER
lamp lights white after flashing.
Do not perform any other operations until the printer completes the cleaning of the print head. This takes
about 1 to 2 minutes.
3. Check the print head condition.
Print the nozzle check pattern
to check the print head condition.
Note
• If the problem is not resolved after cleaning the print head twice, clean the print head deeply.
Cleaning the Print Heads from Your Computer
84
This manual downloaded from http://www.manualowl.com
Summary of Contents for 8747B002
Page 38: ...38 This manual downloaded from http www manualowl com...
Page 48: ...Managing the Printer Power 48 This manual downloaded from http www manualowl com...
Page 51: ...Loading Paper Loading Paper 51 This manual downloaded from http www manualowl com...
Page 101: ...101 This manual downloaded from http www manualowl com...
