168
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
2
Attach the filter adapter.
z
z
Align the
○ mark on the filter adapter with
the
●
mark on the camera, and then turn
the adapter in the direction of the arrows
until it locks in place.
z
z
To remove the adapter, turn off the
camera, hold down the ring release
button, and turn the adapter in the
opposite direction.
3
Attach a filter.
z
z
Attach the filter to the camera in the
direction of the arrow.
•
We recommend the use of genuine Canon filters (58 mm dia.).
•
When not using auto focus to shoot, set the manual focus option
[Safety MF] to [On].
•
If you use the built-in flash with the filter adapter attached, portions
of the image may appear darker.
•
When using the filter adapter, be sure to use only one filter at a time.
Attaching multiple filters, or accessories such as a heavy lens, may
cause the attachments to fall off and become damaged.
•
Do not grip the filter adapter tightly.
•
Remove the filter adapter when not using a filter.
•
The filter adapter and a lens hood cannot be attached to the camera at the
same time.
Still Images
Using a Remote Switch (Sold Separately)
An optional Remote Switch RS-60E3 can be used to avoid camera shake
that may otherwise occur when pressing the shutter button directly. This
optional accessory is convenient when shooting at slow shutter speeds.
1
Connect the remote switch.
z
z
Make sure the camera is off.
z
z
Open the terminal cover and insert the
remote switch plug.
2
Shoot.
z
z
To shoot, press the release button on the
remote switch.
•
Bulb photography (long exposures) is not supported.
