Canon 6352B001 User Manual Download Page 59

Page: 59 / 286

Common, Convenient Features

Once you start the self-timer, the lamp

will blink and the camera will play a self-

timer sound.

Two seconds before the shot, the blinking

and sound will speed up. (The lamp will

remain lit in case the flash fires.)

To cancel shooting after you have

triggered the self-timer, press the

> button.

To restore the original setting, choose

[ ] in step 1.

Still Images

Movies

Using the Self-Timer to Avoid Camera Shake

This option delays shutter release until about two seconds after you have

pressed the shutter button. If the camera is unsteady while you are pressing

the shutter button, it will not affect your shot.

Configure the setting.

Follow step 1 on

58 and choose

[

Once the setting is complete, [

[

] is

displayed.

Follow step 2 on

58 to shoot.

Still Images

Movies

Customizing the Self-Timer

You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).

Choose [

Following step 1 on

58, choose

[

] and press the <

> button

immediately.

COP

Summary of Contents for 6352B001































































































































































































































































































Search results

Summary of Contents for 6352B001

Reviews:

Related manuals for 6352B001

Brands by name

Popular brands

Canon 6352B001, User Manual

Search results

Summary of Contents for 6352B001

Reviews:

Related manuals for 6352B001

Brands by name

Popular brands