Canon 6352B001 Page 248 User Manual Download

Page: 248 / 286

248

Troubleshooting

If you think there is a problem with the camera, first check the following. If the items

below do not solve your problem, contact a Canon Customer Support Help Desk.

Power

Nothing happens when the power button is pressed.

•

Confirm that the battery is charged (

15).

•

Confirm that the battery is inserted facing the correct way (

16).

•

Confirm that the memory card/battery cover is fully closed (

17).

•

Dirty battery terminals reduce battery performance. Try cleaning the terminals with a

cotton swab and reinserting the battery a few times.

The battery is depleted quickly.

•

Battery performance decreases at low temperatures. Try warming the battery a little

by putting it in your pocket, for example, with the terminal cover on.

•

If these measures do not help and the battery is still depleted soon after charging, it

has reached the end of its life. Purchase a new battery.

The lens is not retracted.

•

Do not open the memory card/battery cover while the camera is on. Close the cover,

turn the camera on, and then turn it off again (

17).

The battery is swollen.

•

Battery swelling is normal and does not pose any safety concerns. However, if battery

swelling prevents the battery from fitting in the camera, contact a Canon Customer

Support Help Desk.

Display on a TV

Camera images look distorted or not displayed on a TV (

222).

Shooting

Cannot shoot.

•

In Playback mode (

21), press the shutter button halfway (

39).

Nothing is displayed (

49).

Strange display on the screen under low light (

43).

Strange display on the screen when shooting.

Note that the following display problems are not recorded in still images but are

recorded in movies.

•

The screen may flicker and horizontal banding may appear under fluorescent or LED lighting.

No date stamp is added to images.

•

Configure the [Date Stamp] setting (

61). Note that date stamps are not added to images

automatically, merely because you have configured the [Date/Time] setting (

19).

COP

Summary of Contents for 6352B001































































































































































































































































































Search results

Summary of Contents for 6352B001

Reviews:

Related manuals for 6352B001

Brands by name

Popular brands

Canon 6352B001, User Manual

Search results

Summary of Contents for 6352B001

Reviews:

Related manuals for 6352B001

Brands by name

Popular brands