Canon 6352B001 Page 214 User Manual Download

Page: 214 / 286

214

Tips on Using Included Accessories

Effective Battery and Charger Use

•

Charge the battery on (or immediately before) the

day of use

Charged batteries gradually lose their charge, even when

they are not used.

You can easily check the charge state of the battery by

attaching the cover so that ▲ is visible on a charged

battery, and attaching it so that ▲ is not visible on an

uncharged battery.

•

Long-term battery storage

After using up all remaining battery power, remove the battery from the camera. Store

the battery with the cover attached. Storing a partially charged battery over extended

periods (about a year) may shorten its life or affect performance.

•

Using the battery charger abroad

The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For power

outlets in a different format, use a commercially available adapter for the plug. Never

use an electrical transformer designed for traveling, which may damage the battery.

COP

Summary of Contents for 6352B001































































































































































































































































































Search results

Summary of Contents for 6352B001

Reviews:

Related manuals for 6352B001

Brands by name

Popular brands

Canon 6352B001, User Manual

Search results

Summary of Contents for 6352B001

Reviews:

Related manuals for 6352B001

Brands by name

Popular brands