Canon 6352B001 Page 2 User Manual Download

Page: 2 / 286

Package Contents

Before use, make sure the following items are included in the package.

If anything is missing, contact your camera dealer.

Camera

Battery Pack

NB-10L

(with terminal cover)

Battery Charger

CB-2LC/CB-2LCE

Neck Strap

NS-DC11

Lens Cap

(with cord)

DIGITAL CAMERA

Solution Disk*

(CD-ROM)

Getting Started

Warranty Card

* Contains software and PDF manuals (

28).

•

A memory card is not included (see below).

Compatible Memory Cards

The following memory cards (sold separately) can be used, regardless of capacity.

•

SD memory cards*

•

SDHC memory cards*

•

SDXC memory cards*

•

Eye-Fi cards

* Conforms to SD specifications. However, not all memory cards have been verified to

work with the camera.

About Eye-Fi Cards

This product is not guaranteed to support Eye-Fi card functions (including

wireless transfer). In case of an issue with an Eye-Fi card, please check

with the card manufacturer.

Also note that an approval is required to use Eye-Fi cards in many countries

or regions. Without approval, use of the card is not permitted. If it is unclear

whether the card has been approved for use in the area, please check with

the card manufacturer.

COP

Summary of Contents for 6352B001































































































































































































































































































Search results

Summary of Contents for 6352B001

Reviews:

Related manuals for 6352B001

Brands by name

Popular brands

Canon 6352B001, User Manual

Search results

Summary of Contents for 6352B001

Reviews:

Related manuals for 6352B001

Brands by name

Popular brands