Canon 6352B001 User Manual Download Page 194

Page: 194 / 286

194

Movies

Editing Movies

You can cut movies to remove unneeded portions at the beginning or end.

Choose [

Following steps 1 – 3 on

160 – 161,

choose [

] and press the <

> button.

The movie editing panel and editing bar

are now displayed.

Movie Editing Panel

Movie Editing Bar

Specify portions to cut.

Press the <

> buttons to choose

[ ] or [ ].

To view the portions you can cut

(identified by [ ] on the screen), press

the <

> buttons or turn the <

dial to move [ ]. Cut the beginning of the

movie (from [ ]) by choosing [ ], and

cut the end of the movie by choosing

[ ].

Even if you move [ ] to a position other

than a [ ] mark, choosing [ ] will only

cut the portion from the nearest [ ] to

the left, and choosing [ ] will cut the

portion from the nearest [ ] to the right.

Review the edited movie.

Press the <

> buttons to choose

[ ], and then press the <

> button.

The edited movie is now played.

To edit the movie again, repeat step 2.

To cancel editing, press the <

buttons to choose [ ]. Press the <

button, choose [OK] (either press the

> buttons or turn the <

> dial),

and then press the <

> button again.

COP

Summary of Contents for 6352B001































































































































































































































































































Search results

Summary of Contents for 6352B001

Reviews:

Canon 6352B001, User Manual, Page: 194 / 286

Search results

Summary of Contents for 6352B001

Reviews: