Canon 6352B001 Page 190 User Manual Download

Page: 190 / 286

190

Editing Still Images

Still Images

Cropping

You can specify a portion of an image to save as a separate image file.

Choose [Cropping].

Press the <

> button, and then choose

[Cropping] on the [

] tab (

42).

Choose an image.

Press the <

> buttons or turn the

> dial to choose an image, and then

press the <

> button.

Preview of Image After Cropping

Cropping Area

Resolution After Cropping

Adjust the cropping area.

A frame is displayed around the portion of

the image to be cropped.

The original image is shown in the upper

left, and a preview of the image as

cropped is shown in the lower right.

To resize the frame, move the zoom lever.

To move the frame, press the

> buttons.

To change the frame orientation, press

the <

> button.

Faces detected in the image are

enclosed in gray frames in the upper-left

image. To crop the image based on this

frame, turn the <

> dial to switch to the

other frame.

Press the <

> button.

Save as a new image and review.

Follow steps 4 – 5 on

188.

•

Editing is not possible for images shot at a resolution of [ ]

(

74) or resized to [ ] (

188).

•

RAW images cannot be edited.

COP

Summary of Contents for 6352B001































































































































































































































































































Search results

Summary of Contents for 6352B001

Reviews:

Related manuals for 6352B001

Brands by name

Popular brands

Canon 6352B001, User Manual

Search results

Summary of Contents for 6352B001

Reviews:

Related manuals for 6352B001

Brands by name

Popular brands