Canon 6352B001 Page 161 User Manual Download

Page: 161 / 286

161

Viewing

Volume

Play movies.

To start playback, press the <

> button

to access the movie control panel,

choose [ ] (either press the <

buttons or turn the <

> dial), and then

press the <

> button again.

Adjust the volume.

Press the <

> buttons to adjust the

volume.

Pause playback.

To pause or resume playback, press the

> button.

After the movie is finished, [

] is

displayed.

•

To switch to Shooting mode from Playback mode, press the shutter button

halfway.

•

To deactivate Scroll Display, press the <

> button, choose [Scroll

Display] on the [

] tab, and then choose [Off].

•

If you prefer to have the most recent shot displayed when you enter

Playback mode, press the <

> button, and on the [

] tab, choose

[Resume] and then [Last shot].

•

To change the transition shown between images, press the <

> button,

choose [Transition] on the [

] tab, and then press the <

> buttons to

choose the effect.

COP

Summary of Contents for 6352B001































































































































































































































































































Search results

Summary of Contents for 6352B001

Reviews:

Related manuals for 6352B001

Brands by name

Popular brands

Canon 6352B001, User Manual

Search results

Summary of Contents for 6352B001

Reviews:

Related manuals for 6352B001

Brands by name

Popular brands