Canon 6352B001 Page 116 User Manual Download

Page: 116 / 286

116

Image Brightness (Exposure Compensation)

Still Images

Changing the Metering Method

Adjust the metering method (how brightness is measured) to suit shooting

conditions as follows.

Press the <

> button, choose [ ] in

the menu, and choose the desired option

(

41).

The option you configured is now

displayed.

Evaluative

For typical shooting conditions, including backlit shots.

Automatically adjusts exposure to match the shooting conditions.

Center

Weighted Avg.

Determines the average brightness of light across the entire image area,

calculated by treating brightness in the central area as more important.

Spot

Metering restricted to within the [

] (Spot AE Point frame). You

can also link the Spot AE Point frame to the AF frame (see below).

Still Images

Linking the Spot AE Point Frame to the AF Frame

Set the metering method to [ ].

Follow the steps above to choose [ ].

Configure the setting.

Press the <

> button, choose

[Spot AE Point] on the [

] tab, and then

choose [AF Point] (

42).

The Spot AE Point frame will now be

linked to the movement of the AF frame

(

135).

•

Not available when [AF Frame] is set to [Face Detect] (

133) or

[Tracking AF] (

136).

COP

Summary of Contents for 6352B001































































































































































































































































































Search results

Summary of Contents for 6352B001

Reviews:

Related manuals for 6352B001

Brands by name

Popular brands

Canon 6352B001, User Manual

Search results

Summary of Contents for 6352B001

Reviews:

Related manuals for 6352B001

Brands by name

Popular brands