Canon 6352B001 Page 100 User Manual Download

Page: 100 / 286

100

Image Effects (Creative Filters)

Still Images

Movies

Shooting with Color Swap

You can replace one image color with another before shooting. Note that

only one color can be replaced.

Choose [

Follow steps 1 – 2 on

92 and

choose [

Access the setting screen.

Press the <

> button.

The original image and the Color Swap

image are displayed one after another.

By default, green will be replaced with

gray.

Specify the color to replace.

Position the center frame over the color

to replace, and then press the <

button.

The specified color is recorded.

Specify the new color.

Position the center frame over the new

color, and then press the <

> button.

The specified color is recorded.

COP

Summary of Contents for 6352B001































































































































































































































































































Search results

Summary of Contents for 6352B001

Reviews:

Related manuals for 6352B001

Brands by name

Popular brands

Canon 6352B001, User Manual

Search results

Summary of Contents for 6352B001

Reviews:

Related manuals for 6352B001

Brands by name

Popular brands