Canon 6191B001 User Manual Download Page 113

Page: 113 / 182

113

Magnify an image.

Moving the zoom lever toward

will zoom in

and magnify the image, and

is displayed.

You can magnify images up to about 10x by
continuing to hold the zoom lever.

To zoom out, move the zoom lever toward

. You can return to single-image display

by continuing to hold it.

Move the display position and
switch images as needed.

To move the display position, press the

opqr

buttons.

While

is displayed, you can switch to

by pressing the

button. To switch

to other images while zoomed, press the

buttons. Press the

button again to restore

the original setting.

•

Touching the screen will zoom in and magnify the image, and

and

are displayed.

•

You can magnify images up to about 10x, centered around where you
touch, by touching repeatedly.

•

You can also zoom in or out by touching

. To zoom in or out

continuously, touch and hold

•

To move the display position, drag across the screen.

•

Touch

to restore single-image display.

Image Viewing Options

Magnifying Images

Still Images

Approximate Position of

Displayed Area

•

You can return to single-image display from magnified display by pressing the

button.

Using the Touch-Screen Panel

•

Touch operation is not available when

is displayed.

A3400 IS

COP

Summary of Contents for 6191B001























































































































































































Search results

Summary of Contents for 6191B001

Reviews:

Related manuals for 6191B001

Brands by name

Popular brands

Canon 6191B001, User Manual

Search results

Summary of Contents for 6191B001

Reviews:

Related manuals for 6191B001

Brands by name

Popular brands