manualshive.com logo in svg

Canon 6160, Operation Manual, Page: 197 / 222

Share
Download
Canon 6160 Operation Manual Download Page 197

Check the status of the toner reservoirs

Introduction

The machine has 2 toner reservoirs. The toner reservoirs are located at the left-hand side and the
right-hand side of the engine module 

Introduction to the main system components on page 20

.

You can check the status of the toner reservoirs in the dashboard 

The dashboard on page 24

 and

in the [System] view. The [System] view also displays the current filling level of each toner
reservoir as a percentage. The icons in the following table indicate the status of the toner
reservoirs.

This section gives an overview of the possible toner statuses. Furthermore, this section describes
how to check the status.

The meaning of the toner icons

The toner icons

Toner icon

Description

The toner icon is blue. All 3 blocks of the status bar are green. The to-
ner reservoir is filled over 75%. Do not add toner.

The toner icon is blue. 2 Blocks of the status bar are green. The toner
reservoir is filled over 50%. You can add 1 bottle of toner.

The toner icon is blue. 1 Block of the status bar is green. The toner res-
ervoir is filled over 25%. You can add 2 bottles of toner.

The toner icon is orange. The status bar contains no more green
blocks. The toner reservoir is filled less than 25%. The printer can print
another 600 sheets. You must add up to 3 toner bottles as soon as pos-
sible.

The toner icon is red. The status bar has a red frame. The toner reser-
voir is empty. The printing stops. You must add maximum 3 toner bot-
tles to continue the printing.

The toner icon is grayed out. The status of the toner reservoir is un-
known. This status is only displayed when the system is initializing.

The toner icon is grayed out and has a blue dotted frame. The status
bar is grayed out and has a red dotted frame. The status of the toner
reservoir is unknown. This status is only displayed when the toner ac-
cess cover is open.

Procedure

1.

Check the toner icons in the dashboard.

NOTE

Follow the steps 2 and 3 to view the status of the toner reservoirs as a percentage.

2.

Touch the [System] button.

3.

Press [Printer].
The [System] view displays the current filling level of the toner reservoirs as a percentage. The
percentage matches the blocks that are indicated in the dashboard.

Check the status of the toner reservoirs

Chapter 12 - Keeping the printer running

197

Summary of Contents for 6160































































































































































































































Reviews:

No comments