Canon 6160, Operation Manual

Page: 173 / 222

Die sets available
Introduction
The puncher can use many different die sets to punch your documents. The punching pattern of a
die set determines the binding style of your document. This section describes the die sets
available for the puncher.
NOTE
The puncher is available in 2 versions: one version for A4 media and one version for Letter
media. A4 punchers require an A4 die set. Letter punchers require a Letter die set. You cannot
use A4 die sets in Letter punchers, or the other way round.
Die set summary
Each punching style listed in the tables below requires a separate die set. All the die sets can
handle media up to 216 g/m² (80 lb. cover).
Die sets available for A4 punchers
Number of holes, shape Type of binding Type of die set
2, round Loose-leaf binding 2-Hole
4, round Loose-leaf binding 4-Hole
12, round
VeloBind
®
binding VeloBind
®
20, rectangular Plastic Comb binding Plastic Bind
21, rectangular Plastic Comb binding Plastic Bind
23, round Wire binding Wire 02:01 AM (2 holes/inch)
34, round Wire binding Wire 03:01 AM (3 holes/inch)
47, round Plastic Coil binding Color Coil
Die sets available for Letter punchers
Number of holes, shape Type of binding Type of die set
3, round Loose-leaf binding 3-Hole
11, round
VeloBind
®
binding VeloBind
®
19, rectangular Plastic Comb binding Plastic Bind
32, square Wire binding Wire 03:01 AM (3 holes/inch)
44, round Plastic Coil binding Color Coil
Die sets available
Chapter 10 - Optional finishers and other devices 173