Canon 600EXII-RT Instruction Manual Download Page 82

Page: 82 / 148

In radio transmission wireless shooting, you can fire the test flash and
modeling flash (p.47) from a 600EX II-RT set as a slave unit.

Display <

Press the slave unit’s function button
4 to display <

Fire the flash.

[Test flash firing]

Press the slave unit’s function button
3 <

[Modeling flash]

(p.47)

Press the slave unit’s function button
2 <

A flash signal is sent from the slave
unit to the master unit, and a wireless
system test flash or modeling flash is
fired.

Test Flash and Modeling Flash from a Slave Unit

Modeling flash is not possible from a slave unit with cameras released up
to 2011 or with EOS REBEL T6/1300D or EOS REBEL T5/1200D.

For the precautions related to modeling flash, see page 47.

When C.Fn-02-1 is set on the master unit (p.113), modeling flash will not
be fired even if you select <

When there are two or more master units (p.72), the flash signal is sent to
the main master that has the <

> lamp lit in green.

Summary of Contents for 600EXII-RT





















































































































































Search results

Summary of Contents for 600EXII-RT

Reviews:

Related manuals for 600EXII-RT

Brands by name

Popular brands

Canon 600EXII-RT, Instruction Manual

Search results

Summary of Contents for 600EXII-RT

Reviews:

Related manuals for 600EXII-RT

Brands by name

Popular brands