Canon 600EXII-RT, Instruction Manual

Page: 42 / 148

42
When using stroboscopic flash with a slow shutter speed, you can shoot
multiple successive movements within a single picture, similar to stop-
motion pictures.
With stroboscopic flash, set the flash output, number of flashes, and
flash frequency (number of flashes per second = Hz). For the maximum
number of continuous flashes, see page 44.
1
Set the flash mode to <
?
>.
Press the <
E
> button.
Turn <
9
> to select <
Q
>, then
press <
8
>.
2
Select an item.
Press the < @ > function button
for the flash output, press < Q >
for the number of flashes, and press
<
G > for the flash frequency.
X You can set the item of the button you
pressed.
3
Set the value.
Turn <
9
> to set the value, then
press <
8
>.
Repeat steps 2 and 3 to set the flash
output, number of flashes, and flash
frequency.
?
: Stroboscopic Flash
N
Number of flashes Flash frequency
Flash output