Canon 5975B003 Page 186 Instruction Manual Download

Page: 186 / 226

186

Additional Information

Memory operation

Record,

Record pause,

Playback,

Playback pause,

Fast playback,

Fast reverse playback,

Slow playback,

Slow reverse playback,

Frame advance,

Frame reverse.

Remaining battery level; also remaining battery time when using an

optional battery pack

• The icon shows a rough estimate of

the remaining charge as a
percentage of the full charge of the
battery pack.

• When the battery charge becomes low,

will appear in yellow. When the battery

pack is exhausted,

will appear in red. Replace or charge the battery pack.

Depending on the condition of the camcorder or battery, the actual battery charge
may not match what is displayed on the screen.

• When you attach an empty battery pack, the power may turn off without displaying

• Depending on the conditions under which the camcorder and the battery pack are

used, the actual battery charge may not be indicated accurately.

• You can display the charge status of a battery pack with the

[Battery Info]

setting. If the battery pack is exhausted, the battery information may not be
displayed.

Remaining recording time

When there is no more free space on the memory, [

End] (built-in memory,

only) or [

End] (memory card) will be displayed in red and the recording will

stop.

100%

75%

50%

25%

COP

Summary of Contents for 5975B003



































































































































































































































Search results

Summary of Contents for 5975B003

Reviews:

Related manuals for 5975B003

Brands by name

Popular brands

Canon 5975B003, Instruction Manual

Search results

Summary of Contents for 5975B003

Reviews:

Related manuals for 5975B003

Brands by name

Popular brands