Canon 580EX - Speedlite II - Hot-shoe clip-on..., Service Manual, Page: 42 / 97

Repair Information
7
3. Auto Focus LED Panel Ass'y removal
・ Remove the Front Cover Ass'y from the Auto Focus LED Panel Ass'y. (Hooks in 4 places)
(Fig. 010)
NOTE 5 ：Auto Focus LED Panel Ass'y removal
・ When pushing on the Auto Focus LED Panel Ass'y hooks, make sure not to damage
the unit by using excessive force.
・ Do not disassemble the Assist beam emitter of the Front Cover Ass'y (Fig. 011). It is
preadjusted at the factory. When this part is disassembled, the entire unit must be
replaced. The Auto Focus LED Panel Ass'y can be replaced separately.
Fig. 010 Auto Focus LED Panel Ass'y Fig. 011 Assist Beam Emitter
4. Power Jack Ass'y removal
① Remove the Power Jack Cap.
② After removing the screw, push from the outside to the inside to detach the Power
Jack Ass'y.
5. Peel off the Front Cover Tape.
6. Battery Case Ass'y removal
Positioning the vertical bounce of the Flash Head at 75° will make it easier to repair.
① Peel off the Bond Super X.
② Detach the Fiber Wire from the Rear Cover Ass'y.
NOTE 6
：Handling the Fiber Wire
・ Do not use excessive force or overly bend the Fiber Wire as it is easily damaged.