Canon 5251B001 User Manual Download Page 99

Page: 99 / 220

Red-Eye Correction

Choose

After pressing the

button, press the

buttons or turn the

dial to choose

then press the

button.

Once set,

will appear on the screen.

Shoot.

Even if the flash fires, ensure that the main
subject does not move until the shutter
sound ends.

You can automatically correct red-eye that occurs in images taken with the
flash.

Choose [Flash Control].

Press the

button to choose [Flash

Control] in the

tab, then press the

button.

Choose the setting.

Press the

buttons or turn the

dial

to choose [Red-Eye Corr.], then press the

buttons to choose [On].

Once set,

will appear on the screen.

Attach the camera to a tripod to prevent the camera from moving and
blurring the image. Additionally, you should set [IS Mode] to [Off] when
shooting with a tripod (p. 168).

What if the setting screen does not appear even when you
press the

button?

The flash is lowered. Raise the flash manually.

Red-Eye Correction

COP

Summary of Contents for 5251B001





























































































































































































































Search results

Summary of Contents for 5251B001

Reviews:

Related manuals for 5251B001

Brands by name

Popular brands

Canon 5251B001, User Manual

Search results

Summary of Contents for 5251B001

Reviews:

Related manuals for 5251B001

Brands by name

Popular brands